Free Shipping on orders over $75.00! Restrictions Apply Offer Details

HOLIDAY GIFT CENTER 2019 Shop Our Gift Department
{"id":1827149217835,"title":"tailBeacon ADS-B Out, WAAS GPS, Encoder, Rear Position LED Nav Light by uAvionix","handle":"tailbeacon-ads-b-out-waas-gps-encoder-rear-position-led-nav-light-by-uavionix","description":"\u003cp\u003eThe tailBeacon from uAvionix is a revolutionary new way to equip ADS-B out for your certified aircraft. This rear position nav light is integrated with ADS-B Out, GPS, and LED position lighting. This is the lowest total cost of ownership of any ADS-B Out solution. The easy installation is as simple as replacing the aft aircraft position light. There are no airframe modifications or additional antennas required. The installation only requires 2 screws and reuses the existing power and ground to your current position light as well as the existing breaker. \u003c\/p\u003e\n\u003cp\u003eThe tailBeacon will work with any Mode C and Mode S transponder which meets the 2020 ADS-B requirements. Due to the unique design and technology of the tailBeacon, there is no need to run any new wiring to the transponder. The tailBeacon is eligible for install on any suitable experimental aircraft that routinely flies below FL180. Light Sport aircraft are also eligible for installation but require a Letter of Authorization from the manufacturer. Certified aircraft require the TSO certified version of tailBeacon.\u003c\/p\u003e\n\u003cp\u003eGoof-Proof Configuration, mechanically installing an ADS-B solution is only half the battle.  The skyBeacon mobile application can also be used to configure tailBeacon.  The intuitive, easy to use app guides you through setting the necessary values including the ICAO address, emitter type, aircraft length, width and GPS offsets.  Since tailBeacon is self-contained there are no serial ports settings or protocols to configure.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eInstallation is as simple as replacing the aft aircraft position light.\u003c\/li\u003e\n\u003cli\u003eNo airframe modifications or additional antennas are required.\u003c\/li\u003e\n\u003cli\u003eWorks with any Mode C or Mode S transponder.\u003c\/li\u003e\n\u003cli\u003eTransponder data is provided via the existing aircraft wiring system using the Power Transcoder.\u003c\/li\u003e\n\u003cli\u003etailBeacon uses the existing mounting location, breaker, and wiring.\u003c\/li\u003e\n\u003cli\u003eThe installation requires 2 screws and reuses the existing power and ground to your current position light.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003ca href=\"http:\/\/uavionix.com\/downloads\/tailbeacon\/tailBeaconEXPuserManual.pdf\" target=\"_blank\" title=\"tailBeacon EXP Install Guide\" rel=\"noopener noreferrer\"\u003etailBeacon EXP Install Guide\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"http:\/\/uavionix.com\/downloads\/tailbeacon\/tailBeacon-Mounting-Template-V001.pdf\" target=\"_blank\" title=\"tailBeacon Mounting Template\" rel=\"noopener noreferrer\"\u003etailBeacon Mounting Template\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e","published_at":"2019-07-04T18:18:37-04:00","created_at":"2019-07-04T18:18:39-04:00","vendor":"uAvionix","type":"GPS Receivers","tags":["Brand_uAvionix","GPS Receivers","New"],"price":199900,"price_min":199900,"price_max":199900,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":16724949860395,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"38754","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"tailBeacon ADS-B Out, WAAS GPS, Encoder, Rear Position LED Nav Light by uAvionix","public_title":null,"options":["Default Title"],"price":199900,"weight":453,"compare_at_price":null,"inventory_management":"shopify","barcode":""}],"images":["\/\/cdn.shopify.com\/s\/files\/1\/2773\/1296\/products\/tailbeacon-ads-b-out-waas-gps-encoder-rear-position-led-nav-light-by-uavionix-uavionix-857560.jpg?v=1562331606"],"featured_image":"\/\/cdn.shopify.com\/s\/files\/1\/2773\/1296\/products\/tailbeacon-ads-b-out-waas-gps-encoder-rear-position-led-nav-light-by-uavionix-uavionix-857560.jpg?v=1562331606","options":["Title"],"content":"\u003cp\u003eThe tailBeacon from uAvionix is a revolutionary new way to equip ADS-B out for your certified aircraft. This rear position nav light is integrated with ADS-B Out, GPS, and LED position lighting. This is the lowest total cost of ownership of any ADS-B Out solution. The easy installation is as simple as replacing the aft aircraft position light. There are no airframe modifications or additional antennas required. The installation only requires 2 screws and reuses the existing power and ground to your current position light as well as the existing breaker. \u003c\/p\u003e\n\u003cp\u003eThe tailBeacon will work with any Mode C and Mode S transponder which meets the 2020 ADS-B requirements. Due to the unique design and technology of the tailBeacon, there is no need to run any new wiring to the transponder. The tailBeacon is eligible for install on any suitable experimental aircraft that routinely flies below FL180. Light Sport aircraft are also eligible for installation but require a Letter of Authorization from the manufacturer. Certified aircraft require the TSO certified version of tailBeacon.\u003c\/p\u003e\n\u003cp\u003eGoof-Proof Configuration, mechanically installing an ADS-B solution is only half the battle.  The skyBeacon mobile application can also be used to configure tailBeacon.  The intuitive, easy to use app guides you through setting the necessary values including the ICAO address, emitter type, aircraft length, width and GPS offsets.  Since tailBeacon is self-contained there are no serial ports settings or protocols to configure.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eInstallation is as simple as replacing the aft aircraft position light.\u003c\/li\u003e\n\u003cli\u003eNo airframe modifications or additional antennas are required.\u003c\/li\u003e\n\u003cli\u003eWorks with any Mode C or Mode S transponder.\u003c\/li\u003e\n\u003cli\u003eTransponder data is provided via the existing aircraft wiring system using the Power Transcoder.\u003c\/li\u003e\n\u003cli\u003etailBeacon uses the existing mounting location, breaker, and wiring.\u003c\/li\u003e\n\u003cli\u003eThe installation requires 2 screws and reuses the existing power and ground to your current position light.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003ca href=\"http:\/\/uavionix.com\/downloads\/tailbeacon\/tailBeaconEXPuserManual.pdf\" target=\"_blank\" title=\"tailBeacon EXP Install Guide\" rel=\"noopener noreferrer\"\u003etailBeacon EXP Install Guide\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"http:\/\/uavionix.com\/downloads\/tailbeacon\/tailBeacon-Mounting-Template-V001.pdf\" target=\"_blank\" title=\"tailBeacon Mounting Template\" rel=\"noopener noreferrer\"\u003etailBeacon Mounting Template\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e"}
New Product
New Product

tailBeacon ADS-B Out, WAAS GPS, Encoder, Rear Position LED Nav Light by uAvionix

Product Description

The tailBeacon from uAvionix is a revolutionary new way to equip ADS-B out for your certified aircraft. This rear position nav light is integrated with ADS-B Out, GPS, and LED position lighting. This is the lowest total cost of ownership of any ADS-B Out solution. The easy installation is as simple as replacing the aft aircraft position light. There are no airframe modifications or additional antennas required. The installation only requires 2 screws and reuses the existing power and ground to your current position light as well as the existing breaker. 

The tailBeacon will work with any Mode C and Mode S transponder which meets the 2020 ADS-B requirements. Due to the unique design and technology of the tailBeacon, there is no need to run any new wiring to the transponder. The tailBeacon is eligible for install on any suitable experimental aircraft that routinely flies below FL180. Light Sport aircraft are also eligible for installation but require a Letter of Authorization from the manufacturer. Certified aircraft require the TSO certified version of tailBeacon.

Goof-Proof Configuration, mechanically installing an ADS-B solution is only half the battle.  The skyBeacon mobile application can also be used to configure tailBeacon.  The intuitive, easy to use app guides you through setting the necessary values including the ICAO address, emitter type, aircraft length, width and GPS offsets.  Since tailBeacon is self-contained there are no serial ports settings or protocols to configure.

  • Installation is as simple as replacing the aft aircraft position light.
  • No airframe modifications or additional antennas are required.
  • Works with any Mode C or Mode S transponder.
  • Transponder data is provided via the existing aircraft wiring system using the Power Transcoder.
  • tailBeacon uses the existing mounting location, breaker, and wiring.
  • The installation requires 2 screws and reuses the existing power and ground to your current position light.

tailBeacon EXP Install Guide

tailBeacon Mounting Template

 

Sku: 38754
$1,999.00
Maximum quantity available reached.

Order With Confidence

Returns of purchases made today will be accepted for 30 days, if they meet the terms of our standard Return Policy.

Lowest Price Guarantee

PilotMall.com features more than 8,000 products from the traditional to the innovative for the appreciation, maintenance and operation of aircraft. We strive to offer our customers the lowest prices and greatest selection of pilot supplies, educational material and aviation gifts. Click the Request Price Match Button Above and we'll we'll do our best to beat the lowest price that you've seen!

Shipping

Orders for merchandise in stock in our Florida warehouse typically ship same-day if ordered by our 3:00 PM Eastern Time Cutoff. We offer numerous shipping options based on the speed of delivery that you require. You will be prompted to select your desired shipping method during checkout. Shipping rates are quoted in business days.